3Com 5500G-EI Command Reference Guide - Page 157
Static Route, Configuration, Command, delete static-routes all, Syntax, Parameter, Description
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Static Route Configuration Command 157 Table 21 Output Description of the display ip routing-table verbose Command Hidden The number of hidden routes, that is routes not available at present but still required. They can be hidden for future use. Static Route Configuration Command This section describes the command you can use to configure a static route. delete static-routes all Syntax delete static-routes all View System View Parameter None Description Use the delete static-routes all command to delete all the static routes. The system requests your confirmation before it deletes all the configured static routes. Related commands: ip route-static and display ip routing-table. Example Delete all the static routes in the router. system-view System View: return to User View with Ctrl+Z. [SW5500]delete static-routes all Are you sure to delete all the static routes?[Y/N] ip route-static Syntax ip route-static ip_address { mask | mask-length } { interface_name | gateway_address } [ preference preference_value ] [ reject | blackhole ] undo ip route-static ip-address { mask | mask_length } [ interface_name | gateway_address ] [ preference preference_value ] [ reject | blackhole ] View System view Parameters ip-address Enter the destination IP address in dotted decimal notation. mask Enter the IP subnet mask.