3Com 5500G-EI Command Reference Guide - Page 488
Example, snmp-agent trap, queue-size, Syntax, Parameter, Description, snmp-agent trap source
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 488 highlights
488 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS For the related commands, see snmp-agent trap enable, snmp-agent target-host. Example Configure the timeout interval of Trap packet as 60 seconds. system-view System View: return to User View with Ctrl+Z. [SW5500]snmp-agent trap life 60 snmp-agent trap Syntax queue-size snmp-agent trap queue-size length undo snmp-agent trap queue-size View System view Parameter length: Length of queue, ranging from 1 to 1000; the default length is 100. Description Use the snmp-agent trap queue-size command to configure the information queue length of Trap packet sent to destination host. Use the undo snmp-agent trap queue-size command to restore the default value. For the related commands, see snmp-agent trap enable, snmp-agent target-host, snmp-agent trap life. Example Configure the queue length to 200. system-view System View: return to User View with Ctrl+Z. [SW5500]snmp-agent trap queue-size 200 snmp-agent trap source Syntax snmp-agent trap source vlan-interface vlan-id undo snmp-agent trap source View System view Parameter vlan-id: Specify the VLAN interface ID, ranging from 1 to 4094. Description Use the snmp-agent trap source command to specify the source address for sending Traps. Use the undo snmp-agent trap source command to cancel the source address for sending Traps.