3Com 5500G-EI Command Reference Guide - Page 233

Route Capacity Configuration Commands 233 memory of the Ethernet switch reduces to a lower limit, the connection will be disconnected forcibly). Related commands: memory auto-establish enable, memory { safety | limit }, display memory limit. Example Disable memory resume of the current Ethernet switch and recover connections of all the protocols automatically. system-view System View: return to User View with Ctrl+Z. [SW5500]memory auto-establish disable memory auto-establish Syntax enable memory auto-establish enable View System View Parameter None Description Use the memory auto-establish enable command to allow the routing protocol connection that is forcibly disconnected to recover automatically when the idle memory of the Switch reaches this value. By default, when the idle memory of the Switch recovers to a safety value, connections of all the routing protocols will always recover (when the idle memory of the Ethernet switch reduces to a lower limit, the connection will be disconnected forcibly). Related commands: memory auto-establish disable, memory { safety | limit }, display memory limit. Example Enable memory resume of the current Switch and recover connections of all the protocols automatically. system-view System View: return to User View with Ctrl+Z. [SW5500]memory auto-establish enable memory { safety | limit } Syntax memory { safety safety_value | limit limit_value }* undo memory [ safety | limit ] View System View