3Com 5500G-EI Command Reference Guide - Page 221

IP Routing Policy Configuration Commands 221 View Route Policy View Parameter value Enter the route cost value of route information. Description Use the apply cost command to configure the route cost value of route information. This command is one of the apply sub-statements of the Route-policy attribute set. Use the undo apply cost command to cancel the apply sub-statement. Related commands: if-match interface, if-match acl, if-match ip-prefix, if-match ip next-hop, if-match cost, if-match tag, route-policy, apply ip next-hop, apply local-preference, apply origin and apply tag. Example Define one apply sub-statement. When it is used for setting route information attribute, it sets the route metric value of route information to 120. system-view System View: return to User View with Ctrl+Z. [SW5500]route-policy permit node 1 % New sequence of this list [SW5500-route-policy]apply cost 120 apply tag Syntax apply tag value undo apply tag View Route Policy view Parameter value Enter the tag value of route information. Description Use the apply tag command to configure to set the tag area of OSPF route information. This command is one of the apply sub-statements of the Route-policy attribute set. Use the undo apply tag command to cancel the apply sub-statement. Related command: if-match interface, if-match acl, if-match ip-prefix, if-match ip next-hop, if-match cost, if-match tag, route-policy, apply ip next-hop, apply local-preference, apply cost and apply origin. Example Define one apply sub-statement. When it is used for setting route information attribute, it sets the tag area of route information to 100.