3Com 5500G-EI Command Reference Guide - Page 457

Log Commands 457 View Any View Parameter Use the display hwping command to view test results. If a test group is specified using the arguments of administrator-name and test-operation-tag , the system displays only the test result of the group. If not, it displays the test results of all the test groups. For the related command, see test-enable Example Display the test result of the test group whose administrator name is 'administrator' and operation tag is 'jitter'. [SW5500]display hwping result administrator icmp Log Commands This section displays the logging options available on your Switch 5500G-EI. display channel Syntax display channel [ channel-number | channel-name ] View All views Parameter channel-number: Channel number, ranging from 0 to 9, that is, the system has ten channels. channel-name: Specify the channel name, the name can be console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7, channel8, channel9. Where console is channel 0, monitor is channel 1, loghost is channel 2, trapbuffer is channel 3, logbuffer is channel 4 and snmpagent is channel 5. Description Use the display channel command to display the details about the information channel. Without a parameter, the display channel command shows the configurations of all the channels. Example Show details about the information channel 0. display channel 0 channel number:0, channel name:console MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUGGING_LEVEL 0xffff0000default Y warning Y debugging Y debugging