3Com 5500G-EI Command Reference Guide - Page 355

Centralized MAC Address Authentication Configuration Commands 355 Description Use the debugging mac-authentication event command to enable centralized MAC address authentication event debugging. Use the undo debugging mac-authentication event command to disable event debugging. Example To enable centralized MAC address authentication event debugging, enter the following: debugging mac-authentication event display Syntax mac-authentication display mac-authentication [ interface interface-list ] View Any view Parameter interface interface-list: Ethernet interface list including several Ethernet interfaces, expressed in the format interface-list = { interface-num [ to interface-num ] } & < 1-10 >. interface-num specifies a single Ethernet interface in the format interface-num = { interface-type interface-num | interface-name }, where interface-type specifies the interface type, interface-num specifies the interface number and interface-name specifies the interface name. For the respective meanings and value ranges, see the parameters in the Port Command chapter. Description Use the display mac-authentication command to display the global information on centralized MAC address authentication, including centralized MAC address authentication features, value of each current timer, number of online users, the MAC address in silent periods, and the authentication status of the MAC address on each interface. Example Display the gloable information of centralized MAC address authentication display mac-authentication mac address authentication is Enabled. offline detect period is 300s quiet period is 1 minute server response timeout value is 100s max allowed user number is 1024 current user number amounts to 0 current domain: Silent Mac User info: MAC ADDR From Port Port Index GigabitEthernet1/0/1 is link-up MAC address authentication is Enabled Authenticate success: 0, failed: 0 Current online user number is 0 MAC ADDR Authenticate state AuthIndex