3Com 5500G-EI Command Reference Guide - Page 173

RIP Configuration Commands 173 This command is used in conjunction with two other commands: rip input and rip work. rip input and rip output control, respectively, the receipt and the transmission of RIP packets on an interface. rip work allows both receipt and transmission of RIP packets. Related commands; rip input, rip work. Example To prevent the interface Vlan-interface 1 from transmitting RIP packets, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]interface Vlan-interface 1 [SW5500-Vlan-interface1]undo rip output rip split-horizon Syntax rip split-horizon undo rip split-horizon View Interface View Parameter None Description Use the rip split-horizon command to configure an interface to use split horizon when transmitting RIP packets. This is the default. Use the undo rip split-horizon command to configure an interface not to use split horizon when transmitting RIP packets. Normally, split horizon is necessary for preventing router loops. You may need to disable split horizon to ensure proper operation of protocols. Example To set the interface Vlan-interface 1 not to use split horizon when processing RIP packets, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]interface Vlan-interface 1 [SW5500-Vlan-interface1]undo rip split-horizon rip version Syntax rip version 1 rip version 2 [ broadcast | multicast ] undo rip version View Interface View