3Com 5500G-EI Command Reference Guide - Page 176
timers, Syntax, Parameters, Description, Example, traffic-share-across, interface, Related Command
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
176 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS timers Syntax timers { update update-timer-length | timeout timeout-timer-length} * undo timers { update | timeout } * View RIP View Parameters update-timer-length Enter the value of the period update timer, ranging from 1 to 3600 seconds. The default value is 30 seconds. timeout-timer-length Enter the value of the timeout timer, ranging from 1 to 3600 seconds. The default value is 180 seconds. Description Use the timers command to modify the values of the three RIP timers: period update, timeout, and garbage-collection. Use the undo timers command to restore the default settings. By default, the values of period update, timeout, and garbage-collection timers are 30 seconds, 180 seconds, and 120 seconds, respectively. Generally, the value of the garbage-collection timer is fixed to 4 times the value of the period update timer. Adjusting the period update timer will affect the garbage-collection timer. The modification of RIP timers takes effect immediately. Related Command: display rip Example Set the values of the Period Update timer and the Timeout timer of RIP to 10 seconds and 30 seconds respectively. system-view System View: return to User View with Ctrl+Z. [SW5500]rip [SW5500-rip]timers update 10 timeout 30 traffic-share-across- Syntax interface traffic-share-across-interface undo traffic-share-across-interface View RIP View Parameter None