3Com 5500G-EI Command Reference Guide - Page 165
host-route, Syntax, Parameter, Description, Example, import-route
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
RIP Configuration Commands 165 host-route Syntax host-route undo host-route View RIP view Parameter None Description Use the host-route command to configure RIP to accept host routes. This is the default. Use the undo host-route command to configure RIP to reject host routes. Example To configure RIP to reject a host route, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]rip [SW5500-rip]undo host-route import-route Syntax import-route protocol [ cost value | route-policy route-policy-name ] undo import-route protocol View RIP view Parameters protocol Enter the routing protocol to be imported. This can be one of the following: direct, ospf, ospf-ase, ospf-nssa or static. value Enter the cost value of the route to be imported. route-policy route_policy_name Enter a route-policy name. Only routes that match the conditions of the specified policy are imported. Description Use the import-route command to import the routes of other protocols into RIP. Use the undo import-route command to cancel the import of routes from other protocols. By default, RIP does not import any other protocol's route. The import-route command can be used to import the route of another protocol with a certain cost value. RIP regards the imported route as its own route and