3Com 5500G-EI Command Reference Guide - Page 142
Example, tcp window, Syntax, Parameter, Description
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
142 CHAPTER 5: USING NETWORK PROTOCOL COMMANDS Use the undo tcp timer syn-timeout command to restore the default value of the timer. TCP will enable the synwait timer, if a SYN packet is sent. The TCP connection will be terminated If the response packet is not received. Related commands: tcp timer fin-timeout, tcp window. Example To configure the TCP synwait timer value as 80 seconds, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]tcp timer syn-timeout 80 tcp window Syntax tcp window window-size undo tcp window View System View Parameter window-size Enter the size of the transmission and receiving buffers measured in kilobytes (KB), whose value ranges from 1 to 32. By default, the window-size is 8KB. Description Use the tcp window command to configure the size of the transmission and receiving buffers of the connection-oriented Socket. Use the undo tcp window command to restore the default size of the buffer. Related commands: tcp timer fin-timeout, tcp timer syn-timeout. Example To configure the size of the transmission and receiving buffers as 3KB, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]tcp window 3