3Com 5500G-EI Command Reference Guide - Page 520
Example, rsa peer-public-key, Syntax, Parameter, Description, ssh server, authentication-retries
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 520 highlights
520 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS Acknowledgement information will be promoted before the system clears all RSA key pairs. This command is just a one-time instruction, so the result will not be stored in the configuration file. Related command: rsa local-key-pair create. Example To remove all key pairs at the server, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]rsa local-key-pair destroy % The name for the keys which will be destroyed is SW5500_Host . % Confirm to destroy these keys? [yes/no]:y rsa peer-public-key Syntax rsa peer-public-key key-name View System view Parameter key-name: Public key name Description Use the rsa peer-public-key command to enter the public key view. When using this command together with the public-key-code begin command to configure the public key at the client, which is generated randomly by the client program supporting SSH1.5. Related commands: public-key-code begin, public-key-code end. Example To enter the public key view, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]rsa peer-public-key 3COM002 ssh server authentication-retries Syntax ssh server authentication-retries times undo ssh server authentication-retries View System view Parameter times: Specifies authentication retry times, in the range of 1~5.