3Com 5500G-EI Command Reference Guide - Page 217
Description, Example, snmp-agent trap enable, Syntax, Parameter, OSPF TRAP function.
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
OSPF Configuration Commands 217 Description Using the silent-interface command, you can prevent an interface from transmitting OSPF packets. Using the undo silent-interface command, you can restore the default setting. By default, the interface transmits OSPF packets. You can use this command to stop the transmission of OSPF packets on an interface. This prevents the router on some network from receiving the OSPF routing information. On a Switch, this command can disable/enable the specified VLAN interface to send OSPF packets. Example To stop interface Vlan-interface 2 from transmitting OSPF packets, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]router id 1.1.1.1 [SW5500]ospf [SW5500-ospf-1]silent-interface Vlan-interface 2 snmp-agent trap enable ospf Syntax snmp-agent trap enable ospf [ process-id ] [ ifstatechange | virifstatechange | nbrstatechange | virnbrstatechange | ifcfgerror | virifcfgerror | ifauthfail | virifauthfail | ifrxbadpkt | virifrxbadpkt | txretransmit | viriftxretransmit | originatelsa | maxagelsa | lsdboverflow | lsdbapproachoverflow ] undo snmp-agent trap enable ospf [ process-id ] [ ifstatechange | virifstatechange | nbrstatechange | virnbrstatechange | ifcfgerror | virifcfgerror | ifauthfail | virifauthfail | ifrxbadpkt | virifrxbadpkt | txretransmit | viriftxretransmit | originatelsa | maxagelsa | lsdboverflow | lsdbapproachoverflow ] View System View Parameter process-id Enter the process ID of OSPF. The command is applied to all current OSPF processes if you do not specify a process ID. ifstatechange, virifstatechange, nbrstatechange, virnbrstatechange, ifcfgerror, virifcfgerror, ifauthfail, virifauthfail, ifrxbadpkt, virifrxbadpkt, txretransmit, viriftxretransmit, originatelsa, maxagelsa, lsdboverflow, lsdbapproachoverflow: Types of TRAP packets that the switch produces in case of OSPF anomalies. Description Use the snmp-agent trap enable ospf command to enable the OSPF TRAP function. Use the undo snmp-agent trap enable ospf command to disable the OSPF TRAP function.