3Com 5500G-EI Command Reference Guide - Page 394

394 CHAPTER 11: USING AAA AND RADIUS COMMANDS Table 53 Recommended ratio of minute to number of users Number of users 1 to 99 100 to 499 500 to 999 >1000 Real-time accounting interval (minute) 3 6 12 >15 Related commands: retry realtime-accounting, radius scheme. Example To set the real-time accounting interval of RADIUS scheme, "3Com", to 15 minutes, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]radius scheme 3Com [SW5500-radius-3Com]timer realtime-accounting 15 timer response-timeout Syntax timer response-timeout seconds undo timer response-timeout View RADIUS Scheme View Parameter seconds: RADIUS server response timeout timer, ranging from 1 to 10 seconds. By default, the value is 3. Description Use the timer response-timeout command to configure the RADIUS server response timer. Use the undo timer command to restore the default. If the NAS receives no response from the RADIUS server after sending a RADIUS request (authentication/authorization or accounting request) for a period of time, the NAS resends the request, thus ensuring the user can obtain the RADIUS service. You can specify this period by setting the RADIUS server response timeout timer, taking into consideration the network condition and the desired system performance. Related commands: radius scheme, retry. Example To set the response timeout timer in the RADIUS scheme 3Com to 5 seconds, enter the following: system-view System View: return to User View with Ctrl+Z.