3Com 5500G-EI Command Reference Guide - Page 126
Example, display am, Syntax, Parameters, Description, is the port number.
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
126 CHAPTER 5: USING NETWORK PROTOCOL COMMANDS Use the undo am trap enable command to disable the access management trap function. By default, the access management trap is disabled. Example To enable the access management trap, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]am trap enable display am Syntax display am [ interface-list ] View Any view Parameters interface-list Enter to display the access management information of the specified port in the { { interface_type interface_num | interface_name } [ to { interface_type interface_num | interface_name } ] } & format. interface_name Enter the port name, represented with interface_name= interface_type interface_num. interface_type is the port type and interface_num is the port number. & indicates the preceding parameter can be input up to 10 times. Description Use the display am command to view the status of access management function and configuration of IP address pool. Example To display the access management configurations on Ethernet0/1. display am Ethernet1/0/1 Ethernet1/0/1 Status : disabled IP Pools : (NULL)