3Com 5500G-EI Command Reference Guide - Page 195
display ospf nexthop, Syntax, Parameter, Description, Example, Enter the process ID of OSPF
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
OSPF Configuration Commands 195 seq#: 80000001 chksum: 0xfcaf Options: (DC) Net mask: 255.255.0.0 Tos 0 metric:1 E type:2 Forwarding Address:0.0.0.0 Tag: 1 Table 32 Output Description of the display ospf lsdb ase Command Field Description type Type of the LSA ls id Link state ID of the LSA adv rtr Router ID of the router originating the LSA ls age Age of the LSA len Length of the LSA Seq# Sequence number of the LSA chksum Checksum of the LSA Options Options of the LSA Net mask Network mask E type Type of external route Forwarding Address Forwarding address Tag Tag display ospf nexthop Syntax display ospf [ process-id ] nexthop View All Views Parameter process-id Enter the process ID of OSPF, ranging from 1 to 65535. The command is applied to all current OSPF processes if you do not specify a process ID. Description Use the display ospf nexthop command to view the information about the next-hop. Example To display the OSPF next-hop information, enter the following: display ospf nexthop OSPF Process 1 with Router ID 1.1.1.1 The information displays in the following format: Address Type Refcount Intf Addr Intf Name 202.38.160.1 Direct 3 202.38.160.1 Vlan-interface2 202.38.160.2 Neighbor 1 202.38.160.1 Vlan-interface2