3Com 5500G-EI Command Reference Guide - Page 82

82 CHAPTER 3: USING VLAN COMMANDS the command display vlan all to display information on all the VLANs. Use the command display vlan dynamic to display information on VLANs created dynamically by the system. Use the command display vlan static to display information of VLAN created statically by the system. Related command: vlan. Examples To display information about VLAN 1: display vlan 1 VLAN ID: 1 VLAN Type: static Route Interface: configured IP Address: 161.71.61.206 Subnet Mask: 255.255.255.0 Description: VLAN 0001 Tagged Ports: GigabitEthernet1/0/1 GigabitEthernet1/0/2 GigabitEthernet 1/0/3 Untagged Ports: Ethernet1/0/1 Ethernet1/0/2 Ethernet1/0/3 interface VLAN-interface Syntax interface vlan-interface vlan_id undo interface vlan-interface vlan_id View System View Parameter vlan_id: Enter the ID of the VLAN interface you want to configure, in the range 1 to 4094. Note that VLAN1 is the default VLAN and cannot be deleted. Description Use the interface vlan-interface command to enter a VLAN interface view and use the related configuration commands. Use the undo interface vlan-interface command to exit the current VLAN interface. Related command: display interface vlan-interface. Example To enter the interface view of VLAN1, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]interface vlan-interface 1 port Syntax port interface_list