3Com 5500G-EI Command Reference Guide - Page 363

AAA Configuration Commands 363 display domain Syntax display domain [ isp-name ] View All views Parameter isp-name: Specifies the ISP domain name, with a character string not exceeding 24 characters. The specified ISP domain shall have been created. Description Use the display domain command to view the configuration of a specified ISP domain or display the summary information of all ISP domains. This command is used to output the configuration of a specified ISP domain or display the summary information of all ISP domains. If an ISP domain is specified, the configuration information (content and format) will be displayed exactly the same as the displayed information of the display domain command. The output information can help with ISP domain diagnosis and troubleshooting. Note that the accounting scheme to be displayed should have been created. Related commands: access-limit, domain, radius scheme, state, display domain. Example To display the summary information of all ISP domains of the system, enter the following: display domain 0 Domain = default system State = Active Scheme = Local Access-limit = Disable Domain User Template: Idle-cut = Disable Self-service = Disable Messenger Time = Disable Default Domain Name: default_system Total 1 domain(s).1 listed. display local-user Syntax display local-user [ domain isp-name | idle-cut { enable | disable } | service-type { telnet | ftp | ssh | terminal | lan-access } | state { active | block } | user-name user-name | vlan vlanid ] View All views Parameter domain isp-name: Configures to display all the local users in the specified ISP domain. isp-name specifies the ISP domain name with a character string not exceeding 24 characters. The specified ISP domain shall have been created.