3Com 5500G-EI Command Reference Guide - Page 346
dot1x dhcp-launch, Syntax, Parameter, Description, Example, dot1x max-user
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 346 highlights
346 CHAPTER 11: USING AAA AND RADIUS COMMANDS not necessary to transfer the EAP packet to a standard RADIUS packet first and then send it to RADIUS server. To use PAP, CHAP or EAP authentication, RADIUS server should support PAP, CHAP or EAP authentication respectively. Related command: display dot1x. Example Configure 802.1x user to use PAP authentication system-view System View: return to User View with Ctrl-Z [SW5500]dot1x authentication-method pap dot1x dhcp-launch Syntax dot1x dhcp-launch undo dot1x dhcp-launch View System View Parameter None Description Use the dot1x dhcp-launch command to set 802.1x to prevent the Switch from triggering user ID authentication for users who configure static IP addresses in a DHCP environment. Use the undo dot1x dhcp-launch command to allow the Switch to trigger ID authentication. By default, the Switch can trigger user ID authentication for users who configure static IP addresses in a DHCP environment. Related command: dot1x. Example Prevent the Switch from triggering the authentication ID for users who configure static IP addresses in a DHCP environment. system-view System View: return to User View with Ctrl-Z [SW5500]dot1x dhcp-launch dot1x max-user Syntax dot1x max-user user-number [ interface interface-list ] undo dot1x max-user [ interface interface-list ] View Ethernet Port View