3Com 5500G-EI Command Reference Guide - Page 298
Example, monitor-port, Syntax, Parameter, Description, priority
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 298 highlights
298 CHAPTER 8: USING QOS/ACL COMMANDS the Fabric. You need to configure the monitor port before configuring the monitored port. Related command: display mirror. Example To configure GigabitEthernet1/0/1 as a monitored port, and monitor packets in both directions, enter the following: system-view System View: return to User View with Ctrl+Z [SW5500]interface gigabitethernet 1/0/1 [SW5500-GigabitEthernet1/0/1]mirroring-port both monitor-port Syntax monitor-port undo monitor-port View Ethernet Port View Parameter None Description Use the monitor-port command to configure a monitor port. Use the undo monitor-port command to remove the setting of monitor port. The Switch supports one monitor port and one mirroring port. If several Switches form a Fabric, only one monitor port and one mirroring port can be configured in the Fabric. You need to configure monitor port before configuring monitored port. Related command: display mirror. Example To configure the port GigabitEthernet1/0/4 as a monitor port, enter the following: system-view System View: return to User View with Ctrl+Z [SW5500]interface gigabitethernet 1/0/4 [SW5500-GigabitEthernet1/0/4]monitor-port priority Syntax priority priority-level undo priority View Ethernet Port View