3Com 5500G-EI Command Reference Guide - Page 416
FTP Server, Configuration, Commands, Example, startup, saved-configuration, Syntax, Parameter
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 416 highlights
416 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS If you do not enter the file-name parameter in this command, for the switches that have specified the configuration file for booting, the current configurations will be stored to the specified configuration file; and for the switches that have not specified the configuration file for booting, the current configurations will be stored to the default configuration file, 3comoscfg.cfg. Related commands: reset saved-configuration, display current-configuration, display saved-configuration. Example Get the current configuration files stored in flash memory. save The configuration will be written to the device. Are you sure?[Y/N] y Please input the file name(*.cfg)[flash:/sw5500cfg.cfg]: Now saving current configuration to the device. Saving configuration. Please wait startup saved startup Syntax saved-configuration startup saved-configuration [ unit unit-id ] cfgfile View User view Parameter unit unit-id: Specify the Unit ID of switch. cfgfile: The name of the configuration file. It is a string with a length of 5 to 56 characters. Description Use the startup saved-configuration command to configure the configuration file used for enabling the system for the next time. The configuration file must have ".cfg" as its extension name and must be saved under the root directory of the Flash. For the related command, please see display startup Example Configure the configuration file for the next start-up. startup saved-configuration sw5500cfg.cfg FTP Server Configuration Commands This section describes how to use the File Transfer Protocol (FTP) configuration commands on your Switch 5500G-EI.