3Com 5500G-EI Command Reference Guide - Page 141
Example, tcp timer fin-timeout, Syntax, Parameter, Description, tcp timer syn-timeout
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
IP Performance Configuration Commands 141 Example To clear the UDP traffic statistics information, enter the following: reset udp statistics tcp timer fin-timeout Syntax tcp timer fin-timeout time-value undo tcp timer fin-timeout View System View Parameter time-value Enter the TCP finwait timer value in second, with the value ranging from 76 to 3600; By default, 675 seconds. Description Use the tcp timer fin-timeout command to configure the TCP finwait timer. Use the undo tcp timer fin-timeout command to restore the default value of the TCP finwait timer. When the TCP connection state changes from FIN_WATI_1 to FIN_WAIT_2, the finwait timer is enabled. If the switch does not receive FIN packet before finwait timer timeouts, the TCP connection will be terminated. Related commands: tcp timer syn-timeout, tcp window. Example To configure the TCP finwait timer value as 800 seconds, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]tcp timer fin-timeout 800 tcp timer syn-timeout Syntax tcp timer syn-timeout time-value undo tcp timer syn-timeout View System View Parameter time-value Enter the TCP synwait timer value measured in second, whose value ranges from 2 to 600. The default time-value is 75 seconds. Description Use the tcp timer syn-timeout command to configure the TCP synwait timer.