3Com 5500G-EI Command Reference Guide - Page 74
Description, Example, lacp enable, Syntax, Parameter, lacp port-priority
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
74 CHAPTER 2: USING PORT COMMANDS Description Use the display lacp system-id command to view actor system ID, including system priority and system MAC address. Related command: link-aggregation. Example To display the local system ID. display lacp system-id Actor System ID: 0x8000, 00e0-fc00-0100 lacp enable Syntax lacp enable undo lacp enable View Ethernet Port View Parameter None Description Use the lacp enable command to enable LACP. Use the undo lacp enable command to disable LACP. Example To enable LACP at Ethernet1/0/1, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]interface Gigabitethernet 1/0/1 [SW5500-GigabitEthernet1/0/1]lacp enable lacp port-priority Syntax lacp port-priority port-priority-value undo lacp port-priority View Ethernet Port View Parameter port-priority-value: Port priority, ranging from 0 to 65535. By default, it is 32768.