3Com 5500G-EI Command Reference Guide - Page 315
command, you can add a new user to an SNMP, group
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 315 highlights
Logon user's ACL Control Command 315 Parameter v1: V 1 security mode. v2c: V 2 security mode. v3: V 3 security mode. user-name: The user name, ranging from 1 to 32 bytes. group-name: The corresponding group name of the user, ranging from 1 to 32 bytes. authentication-mode: Specifies the security level to "to be authenticated" md5: Specifies the authentication protocol as HMAC-MD5-96. sha: Specifies the authentication protocol as HMAC-SHA-96. auth-password: Authentication password, character string, ranging from 1 to 64 bytes. privacy: Specifies the security level as encryption. des56: Specifies the DES encryption protocol. priv-password: Encryption password, character string, ranging from 1 to 64 bytes. acl acl-number: The number identifier of basic number-based ACLs, ranging from 2000 to 2999. local: Local entity user. engineid: Specifies the engine ID related to the user. engineid-string: Engine ID character string. Description Using the snmp-agent usm-user command, you can add a new user to an SNMP group, and reference the ACL to perform ACL control to the network management users by acl acl-number. Using the undo snmp-agent usm-user command, you can remove the user from the related SNMP group as well as the configuration of the ACL control of the user. Example Add a user "John" to the SNMP group "Mygroup". Specify the security level to "to be authenticated", the authentication protocol to HMAC-MD5-96 and the authentication password to "hello", and reference the ACL 2002 to perform ACL control to the network management users (basic ACL 2002 has already been defined). system-view System View: return to User View with Ctrl+Z