3Com 5500G-EI Command Reference Guide - Page 294
Example, display qos-interface, traffic-redirect, Syntax, Parameter, Description, traffic-statistic
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 294 highlights
294 CHAPTER 8: USING QOS/ACL COMMANDS This command is used for displaying the traffic priority settings. The information displayed includes the ACL corresponding to the traffic tagged with priority, priority type and value. Related command: traffic-priority. Example Display the traffic priority settings. display qos-interface GigabitEthernet1/0/1 traffic-priority GigabitEthernet1/0/1: traffic-priority Inbound: Matches: Acl 2000 rule 1 running Priority action: cos best-effort display qos-interface traffic-redirect Syntax display qos-interface { interface-name | interface-type interface-num | unit-id } traffic-redirect View Any view Parameter interface-name | interface-type interface-num: Interface of the Switch, for more information, refer to the port command in this manual. unit-id: Unit ID of the Switch. Description Use the display qos-interface traffic-redirect command to view the settings of the redirection parameters. The displayed content includes the corresponding ACLs of the traffic to be redirected, the redirected interfaces, and so on. Related conmmand: traffic-redirect. Example Display the redirection parameter configuration. display qos-interface gigabitethernet1/0/1 traffic-redirect GigabitEthernet1/0/1: traffic-redirect Inbound: Matches: Acl 2000 rule 1 running Redirected to: interface GigabitEthernet1/0/2 display qos-interface traffic-statistic Syntax display qos-interface { interface-name | interface-type interface-num | unit-id } traffic-statistic View All views