3Com 5500G-EI Command Reference Guide - Page 154
display ip routing-table, radix, Syntax, Parameter, Description, Example
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
154 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS To display a summary of all static route information, enter the following: display ip routing-table protocol static The information displays in the following format: STATIC Routing tables: Summary count: 1 STATIC Routing tables status:: Summary count: 0 STATIC Routing tables status:: Summary count: 1 Destination/Mask Protocol Pre Cost Nexthop 1.2.3.0/24 STATIC 60 0 1.2.4.5 Interface Vlan-interface2 The displayed information helps you to confirm whether the configuration of the static routing is correct. For detailed description of the output, refer to Table 17. display ip routing-table Syntax radix display ip routing-table radix View All views Parameter None Description Use the display ip routing-table radix command to view the route information in a tree structure. Example To display the route information, enter the following: display ip routing-table radix The information displays in the following format: Radix tree for INET (2) inodes 7 routes 5: +-32+--{210.0.0.1 +--0+ | | +--8+--{127.0.0.0 | | | +-32+--{127.0.0.1 | +--1+ | +--8+--{20.0.0.0 | +-32+--{20.1.1.1 Table 19 Output Description of the display ip routing-table radix Command Field INET inodes routes Description Address suite Number of nodes Number of routes