3Com 5500G-EI Command Reference Guide - Page 338
Parameter, Description, Example, change unit-id, Syntax, Switch 5500G-EI.
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 338 highlights
318 CHAPTER 9: USING FABRIC COMMANDS View System View Parameter self-unit: current unit auto-numbering: change the unit ID automatically. Description Use the change unit command to change the unit ID of the current Switch. By default, the unit ID of a Switch is set to 1. A unit ID can be set to a value in the range from 1 to the maximum number of devices supported in XRN. Example To change the unit ID of the current Switch to 3, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]change self-unit to 3 change unit-id Syntax change unit-id < 1-8 > to { < 1-8 > | auto-numbering } View System View Parameter < 1-8 >: unit ID of the unit in a fabric auto-numbering: change the unit ID automatically. Description Use the change unit-id command to change the unit ID of a Switch in the Fabric. By default, the unit ID of a Switch is set to 1. A unit ID can be set to a value in the range from 1 to the maximum number of devices supported in XRN by the Switch 5500G-EI. Related command: fabric save-unit-id Example To change the unit ID of the Switch from 6 to 4, enter the following: system view System View: return to User View with Ctrl+Z. [SW5500]change unit-id 6 to 4 The unit exists in fabric Continue? [Y/N] y [SW5500] %Apr 2 00:48:34:574 2000 Quidway FTM/3/DDPFLA:- 6 -Change unitid successful, unit 4 saved UnitID(4) in flash! [SW5500]display ftm topology Total number of UNITs in fabric : 8, My CPU ID : 4