3Com 5500G-EI Command Reference Guide - Page 494

494 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS Table 65 Output description of the display rmon history command Field History control table 3COM VALID Samples interface Sampling interval buckets dropevents octets packets broadcastpackets multicastpackets CRC alignment errors undersized oversized packets fragments jabbers collisions utilization Description Index number in history control table Owner The entry corresponding to the index is valid The sampled interface Sampling interval Records in history control table Dropping packet events Sent/received octets in sampling time Packets sent/received in sampling time Number of broadcast packets Number of multicast packets Number of CRC error packets Number of undersized packets Number of oversized packets Number of undersized and CRC error packets Number of oversized and CRC error packets Number of collision packets Utilization display rmon prialarm Syntax display rmon prialarm [ prialarm-table-entry ] View All views Parameter prialarm-table-entry: entry of extended alarm table. Description Use the display rmon prialarm command to display information about extended alarm table. Related command: rmon prialarm. Example Display alarm information about extended RMON. display rmon prialarm Prialarm table 1 owned by 3Com is VALID. Samples absolute value : .1.3.6.1.2.1.16.1.1.1.4.1 Sampling interval : 10(sec) Rising threshold : 1000(linked with event 1) Falling threshold : 100(linked with event 1) When startup enables : risingOrFallingAlarm This entry will exist : forever. Latest value : 0