3Com 5500G-EI Command Reference Guide - Page 389

RADIUS Protocol Configuration Commands 389 Parameter ip-address: IP address, in dotted decimal format. By default, the IP addresses of second accounting server is at 0.0.0.0. port-number: Specifies the UDP port number, ranging from 1 to 65535. By default, the accounting service is provided via UDP 1813. Description Use the secondary accounting command to configure the IP address and port number for the second RADIUS accounting server. Use the undo secondary accounting command to restore the IP address and port number to default values. For detailed information, read the Description of the primary accounting command. Related commands: key, radius scheme, state. Example To set the IP address of the second accounting server of RADIUS scheme, 3Com, to 10.110.1.1 and the UDP port 1813 to provide RADIUS accounting service, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]radius scheme 3Com [SW5500-radius-3Com]secondary accounting 10.110.1.1 1813 secondary Syntax authentication secondary authentication ip-address [ port-number ] undo secondary authentication View RADIUS Scheme View Parameter ip-address: IP address, in dotted decimal format. By default, the IP addresses of second authentication/authorization is at 0.0.0.0. port-number: Specifies the UDP port number, ranging from 1 to 65535. By default, the authentication/authorization service is provided via UDP 1812 Description Use the secondary authentication command to configure the IP address and port number for the second RADIUS authentication/authorization. Use the undo secondary authentication command to restore the IP address and port number to default values. For detailed information, read the Description of the primary authentication command. Related commands: key, radius scheme, state.