3Com 5500G-EI Command Reference Guide - Page 268
Description, Example, display pim bsr-info, Syntax, Parameter
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
268 CHAPTER 7: USING MULTICAST PROTOCOL COMMANDS mrt: debugging information of PIM-SM multicast routing table. timer: debugging information of PIM-SM timer. warning: debugging information of PIM-SM warning message. recv: debugging information of PIM-SM receiving packets. send: debugging information of PIM-SM sending packets. alert | fresh: debugging information of PIM-SM multicast border router event. assert | boostrap | crpadv | jp | reg | regstop: packets type. assert | bsr | crpadv | jp | jpdelay | mrt | probe | spt: debugging information of PIM-SM timer. Description Use the debugging pim sm to enable PIM-SM debugging functions. Use the undo debugging pim sm to disable the debugging functions. By default, PIM-SM debugging functions are disabled. Example Enable all PIM-SM debugging functions [SW5500]debugging pim sm all display pim bsr-info Syntax display pim bsr-info View All Views Parameter None Description Use the display pim bsr-info to display the BSR information. Related command: c-bsr, c-rp. Example display pim bsr-info Current BSR Address: 20.20.20.30 Priority: 0 Mask Length: 30 Expires: 00:01:55 Local host is BSR