3Com 5500G-EI Command Reference Guide - Page 85
Voice VLAN, Configuration, Commands, display voice vlan oui, Syntax, Parameter, Description, Example
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Voice VLAN Configuration Commands 85 Voice VLAN Configuration Commands This section describes the commands you can use to configure voice VLANs. display voice vlan oui Syntax display voice vlan oui View Any view Parameter None Description Use the display voice vlan oui command to display the OUI address supported by the current system and its relative features. Related commands: voice vlan vlan_id enable, voice vlan enable. Example To display the OUI address of Voice VLAN, enter the following: [SW5500]display voice vlan oui Oui Address 00e0-bb00-0000 0003-6b00-0000 00e0-7500-0000 00d0-1e00-0000 00aa-bb00-0000 Mask ffff-ff00-0000 ffff-ff00-0000 ffff-ff00-0000 ffff-ff00-0000 ffff-ff00-0000 Description 3com phone Cisco phone Polycom phone Pingtel phone ABC display voice vlan status Syntax display voice vlan status View Any view Parameter None Description Use the display voice vlan status command to display the relative Voice VLAN features including the Voice VLAN status, the configuration mode, the current Voice VLAN port status etc. Related commands: voice vlan vlan_id enable, voice vlan enable. Example To enable the Voice VLAN on VLAN 2 and display the Voice VLAN status, enter the following: [SW5500]display voice vlan status