3Com 5500G-EI Command Reference Guide - Page 478

478 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS Table 60 Output description of the display snmp-agent statistics command 0 Get-request PDUs accepted and processed Number of the received packets requested by get 0 Get-next PDUs accepted and processed 0 Set-request PDUs accepted and processed Number of the received packets requested by get-next Number of the received packets requested by set 3 Messages passed from the SNMP entity 0 SNMP PDUs which had a tooBig error (Maximum packet size 1500) Total number of the output SNMP packets Number SNMP packet with too_big error 0 SNMP PDUs which had a noSuchName Number of the packets requesting nonexistent MIB error objects 0 SNMP PDUs which had a badValue error Number of SNMP packets with Bad_values error 0 SNMP PDUs which had a general error Number of SNMP packets with General_errors 0 Response PDUs accepted and processed Number of the response packets sent 3 Trap PDUs accepted and processed Number of the sent Trap packets display snmp-agent Syntax sys-info display snmp-agent sys-info [ contact | location | version ]* View All views Parameter None Description Use the display snmp-agent sys-info command to view the system information of SNMP configuration. The information includes the character string sysContact (system contact), the character string describing the system location, the version information about the running SNMP in the system. Example Display the character string sysContact (system contact). display snmp-agent sys-info contact The contact person for this managed node: Mr.Smith -Tel:3306 Display the system location. display snmp-agent sys-info location The physical location of this node: Boston USA Display the version information of running SNMP display snmp-agent sys-info version SNMP version running in the system: SNMPv3