3Com 5500G-EI Command Reference Guide - Page 377

RADIUS Protocol Configuration Commands 377 SchemeName = default system Index=0 Type=3Com Primary Auth IP =127.0.0.1 Port=1645 Primary Acct IP =127.0.0.1 Port=1646 Second Auth IP =0.0.0.0 Port=1812 Second Acct IP =0.0.0.0 Port=1813 Auth Server Encryption Key= 3Com Acct Server Encryption Key= 3Com Accounting method = required TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12 Permitted send realtime PKT failed counts =5 Retry sending times of noresponse acct-stop-PKT =500 Quiet-interval(min) =5 Username format =without-domain Data flow unit =Byte Packet unit =1 unit 1 : Primary Auth State=active, Second Auth State=block Primary Acc State=active, Second Acc State=block Total 1 RADIUS scheme(s). 1 listed display radius statistics Syntax display radius statistics View All views Parameter None Description Use the display radius statistics command to view the statistics information of RADIUS packet. This command outputs the statistics information about the RADIUS packets. The displayed packet information can help with RADIUS diagnosis and troubleshooting. Related command: radius scheme. Example To display the statistics information of RADIUS packets, enter the following: display radius statistics state statistic(total=0): DEAD=1048 AuthProc=0 AuthSucc=0 AcctStart=0 RLTSend=0 RLTWait=0 AcctStop=0 OnLine=0 Stop=0 StateErr=0 Receive and Send packets statistic: Send PKT total :0 Receive PKT total:0 RADIUS received packets statistic: Code= 2,Num=0 ,Err=0 Code= 3,Num=0 ,Err=0