3Com 5500G-EI Command Reference Guide - Page 354

354 CHAPTER 11: USING AAA AND RADIUS COMMANDS View User View Parameter interface interface-list: Ethernet port list including several Ethernet ports. interface-list = { interface-num [ to interface-num ] } & < 1-10 >. interface-num specifies a single Ethernet port in the format port-num = { interface-type interface-num | interface-name }, where interface-type specifies the port type, interface-num specifies the port number and interface-name specifies the port name. For the respective meanings and value ranges, read the Parameter of the Port Configuration section. Description Use the reset dot1x statistics command to reset the statistics of 802.1x. This command can be used to re-perform statistics if the user wants to delete the former statistics of 802.1x. When the original statistics are cleared, if no port type or port number is specified, the global 802.1x statistics of the Switch and 802.1x statistics on all the ports will be cleared. If the port type and port number are specified, the 802.1x statistics on the specified port will be cleared. Related commands: display dot1x. Example Clear the 802.1x statistics on GigabitEthernet 1/0/1. reset dot1x statistics interface Gigabitethernet 1/0/1 Centralized MAC Address Authentication Configuration Commands debugging mac-authentication event Syntax debugging mac-authentication event undo debugging mac-authentication event View User View Parameter None