3Com 5500G-EI Command Reference Guide - Page 148

148 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS Routes matched by access-list 2000: Summary count: 4 Destination/Mask Protocol Pre 10.1.1.0/24 DIRECT 0 10.1.1.2/32 DIRECT 0 Cost Nexthop Interface 0 10.1.1.21 Vlan-interface1 0 127.0.0.1 InLoopBack0 For detailed description of the output information, see Table 18. To display the verbose information of the active and inactive routes that are filtered through basic ACL 2000. display ip routing-table acl 2000 verbose The information displays in the following format: Routes matched by access-list 2000: Generate Default: no + = Active Route, - = Last Active, # = Both* = Next hop in use Summary count:2 **Destination: 10.1.1.0 Mask: 255.255.255.0 Protocol: #DIRECT Preference: 0 *NextHop: 10.1.1.2 Interface: 10.1.1.2(Vlan-interface1) Vlinkindex: 0 State: Age: 7:24 Cost: 0/0 Tag: 0 **Destination: 10.1.1.2 Mask: 255. 255. 255. 255 Protocol: #DIRECT Preference: 0 *NextHop: 127.0.0.1 Interface: 127.0.0.1(InLoopBack0) Vlinkindex: 0 State: Age: 7:24 Cost: 0/0 Tag: 0 Table 18 Output Description of the ip routing-table acl verbose Command Field Destination Mask Protocol Preference Nexthop Interface Vlinkindex Description Destination address Mask Routing protocol Routing preference Next hop address Output interface, through which the data packet destined for the destination network is sent Virtual link index