3Com 5500G-EI Command Reference Guide - Page 370
Parameter, Description, Example, scheme, Syntax
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 370 highlights
370 CHAPTER 11: USING AAA AND RADIUS COMMANDS Parameter radius-scheme-name: Specifies a RADIUS scheme, with a character string not exceeding 32 characters. Description Use the radius-scheme command to configure the RADIUS scheme used by the current ISP domain. This command is used to specify the RADIUS scheme for the current ISP domain. The specified RADIUS scheme shall have been created. Related commands: radius scheme, display radius. Example The following example designates the current ISP domain, marlboro.net, to use the RADIUS server, Radserver. system-view System View: return to User View with Ctrl+Z. [SW5500]domain marlboro.net [SW5500-isp-marlboro.net]radius-scheme Radserver scheme Syntax scheme { radius-scheme radius-scheme-name [ local ] | local | none } undo scheme { radius-scheme | none } View ISP Domain View Parameter radius-scheme-name: RADIUS scheme, a character string not exceeding 32 characters. local: Local authentication. none: No authentication. Description Use the scheme command to configure the AAA scheme to be referenced by the current ISP domain. Use the undo scheme command to restore the default AAA scheme. The default AAA scheme is local. When using scheme radius-scheme radius-scheme-name local in the configuration command, the local refers to the alternative authentication scheme if the RADIUS server does not respond normally. That is, when the RADIUS server operates normally, the local scheme is not used; otherwise, the local scheme is used. When using scheme radius-scheme radius-scheme-name (without local), the local scheme does not work when there is no normal response