Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1003

secPolicyDelete secPolicyDelete Deletes an existing security policy. Synopsis secpolicydelete name Description Use this command to delete an existing security policy from the defined security database. Run secPolicyActivate to delete the policies from the active security policy list. Deleting a security policy does not cause any traffic disruption. Each policy corresponds to a management method. The list of members of a policy acts as an access control list for that management method. Before a policy is created, there is no enforcement for that management method; all access is granted. After a policy has been created and a member has been added to the policy, that policy becomes closed to all access except from included members. If the policy is deleted all access is granted. Notes When an FCS policy is enabled, this command can be issued only from the Primary FCS switch. The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands The following operand is required: "name" Specify the name of a security policy to delete. The policy name must be capitalized. Quotation marks are optional. Once a security policy is deleted, fabric-wide switch access through that method is unrestricted. Valid security policy names include the following: DCC_POLICY_nnn Deletes the specified Device Connection Control (DCC) policy. The DCC_POLICY_nnn name has the common prefix DCC_POLICY_ followed by a string of user-defined characters. These characters do not have to be capitalized. ALL_DCC_POLICY Deletes all DCC policies from the defined policy list. ALL_STALE_DCC_POLICY Deletes all stale DCC policies from the defined policy list. DCC policies become stale when the ports are removed from a logical switch. SCC_POLICY Deletes the Switch Connection Control policy from the defined policy list. FCS_POLICY Deletes the Fabric Configuration Server policy from the defined policy list. Examples To delete an existing security policy: switch:admin> secpolicydelete "DCC_POLICY_ab1" About to delete policy DCC_POLICY_ab1. Are you sure (yes, y, no, n):[no] y DCC_POLICY has been deleted. Brocade Fabric OS Command Reference 979 53-1004112-02