Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 213

dnsConfig dnsConfig Sets, displays, or removes domain name service (DNS) parameters. Synopsis dnsconfig dnsconfig --add -domain name -serverip1 ipaddr serverip2 ipaddr dnsconfig --delete dnsconfig --show dnsconfig --help Description Use this command to display, set, or remove the domain name service parameters. The domain name service parameters are the domain name and the name server IP address for primary and secondary name servers. The dnsconfig command displays IPv4 and IPv6 addresses. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: --add Sets the DNS configuration. -domain name Specifies the DNS domain name. -serverip1 ipaddr Specifies the DNS primary server IP address. The IP address can be an IPv4 or IPv6 address. -serverip2 ipaddr Specifies the DNS secondary server IP address. The IP address can be an IPv4 or IPv6 address. --delete Removes the DNS configurations. --show Displays the current DNS configuration. --help Displays the command usage. Examples To set the DNS parameters for the system: switch:admin> dnsconfig Enter option 1 Display Domain Name Service (DNS) configuration 2 Set DNS configuration Brocade Fabric OS Command Reference 189 53-1004112-02