Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 867
To display the ARP tables on the Brocade 7840, To display the auto-negotiation of 1GbE port
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 867 highlights
portShow ge14.dp0 fe80:e::5:33ff:f065:7b16 / 64 1500 0 U R M ge14.dp1 fe80:e::5:33ff:f165:7b16 / 64 1500 0 U R M ge15.dp0 fe80:f::5:33ff:f065:7b17 / 64 1500 0 U R M ge15.dp1 fe80:f::5:33ff:f165:7b17 / 64 1500 0 U R M ge16.dp0 fe80:10::5:33ff:f065:7b18 / 64 1500 0 U R M ge16.dp1 fe80:10::5:33ff:f165:7b18 / 64 1500 0 U R M ge17.dp0 fe80:11::5:33ff:f065:7b19 / 64 1500 0 U R M ge17.dp1 fe80:11::5:33ff:f165:7b19 / 64 1500 0 U R M Flags: U=Up B=Broadcast D=Debug L=Loopback P=Point2Point R=Running N=NoArp PR=Promisc M=Multicast S=StaticArp LU=LinkUp X=Crossport To display the ARP tables on the Brocade 7840: switch:admin> portshow arp Port IP Address MAC Address Flags ge6.dp0 77.195.6.1 00:00:00:00:00:00 Dynamic ge6.dp0 192.168.0.10 00:05:33:65:84:0e Dynamic Resolved ge8.dp0 10.1.8.76 00:05:33:65:84:10 Dynamic Resolved switch:admin> portshow arp ge6 Port IP Address MAC Address Flags ge6.dp0 77.195.6.1 00:00:00:00:00:00 Dynamic ge6.dp0 192.168.0.10 00:05:33:65:84:0e Dynamic Resolved To display the auto-negotiation of 1GbE port: switch:admin> portshow autoneg 1/ge2 Auto-Negotiation Configuration: Port: 1/ge2 Auto-Negotiate: Enabled To display the IPSEC policy for a Brocade 7840 switch: switch:admin> portshow portshow ipsec-policy --ike IPSec Policy Key IKE-ID Oper Flg Local-Addr Remote-Addr IKE Rekey ESP Rekey policy1 123456789012 dp0.0 UP R 192.168.0.20 192.168.0.120 - - - - dp0.1 UP I 192.168.0.20 192.168.0.121 2h44m4s 0 3h41m1s 1 dp1.0 UP I 192.168.0.21 192.168.0.120 2h43m58s 0 41m16s 0 Flags: *=Name Truncated I=Initiator R=Responder Brocade Fabric OS Command Reference 843 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/867.png)