Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 810

portLedTest -action action 0 1 2 3 4 5 16 17 Specifies the LED color. Valid values include the following: This is the default action. Cycle all Port LEDs. C3 cycles are faster than C2 cycles. Turn Port status LED off. Turn Port status LED amber. Turn Port status LED green. Blink Port status LED Green. Supported only on C4 platforms. Blink Port status LED Amber. Supported only on C4 platforms. Not supported for C2, C3, and C4 platforms. Not supported for C2, C3, and C4 platforms. Supported for the C3 core, and the port status LED blinks amber. Examples To test port LEDs on user port 1 use the corresponding value in the "BPt" column of the bladePortMap command (requires root permission): switch:admin> portledtest --slot 1 -ports 213 Running portledtest WARNING: This test should NOT be aborted in the middle. If aborted, current blade or the switch (in-case of Pizza box) may become unusable. Reset the blade or the switch to recover. PASSED. SEE ALSO chassisDisable, chassisEnable, fcipLedTest, itemList, switchDisable, switchEnable 786 Brocade Fabric OS Command Reference 53-1004112-02