Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 707
through a disruptive, To set the fill word of a port to ARBFF-ARBFF using the numeric mode notation
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 707 highlights
portCfgFillword passive 0 1 Specifies the fill word configuration changes to take effect immediately or next port toggle. This operand is optional. Valid values are one of the following: Specify 0 for the new settings to take effect immediately. Specify 1 to postpone the new settings to take effect only after the next time the port goes offline and comes back up. It prevents immediate application of the new settings through a disruptive portDisable and portEnable operation. Examples To set the fill word of a port to ARBFF-ARBFF using the numeric mode notation: switch:admin> portcfgfillword 2/3, 1 To set the fill word of a port to ARBFF-ARBFF using the -arbff-arbff option: switch:admin> portcfgfillword 2/3, -arbff-arbff To set the fill word of a port to IDLE-ARBFF using the -idle-arbff option: switch:admin> portcfgfillword 27, -idle-arbff switch:admin> portcfgshow 27 Area Number: 27 Speed Level: AUTO(HW) Fill Word(On Active) 2(SW Idle-Arbff) Fill Word(Current) 2(SW Idle-Arbff) (output truncated) To set the fill word of a port using the passive option: switch:admin> portcfgfillword 10/2 2 1 switch:admin> portcfgshow 10/2 Area Number: 82 Speed Level: AUTO(HW) Fill Word(On Active) 2(SW Idle-Arbff) Fill Word(Current) 1(Arbff-Arbff) (output truncated) switch:admin> portdisable 10/2; portenable 10/2 switch:admin> portcfgshow 10/2 Area Number: 82 Speed Level: AUTO(HW) Fill Word(On Active) 2(SW Idle-Arbff) Fill Word(Current) 2(SW Idle-Arbff) AL_PA Offset 13: OFF switch:admin> portcfgfillword 10/2 3 0 switch:admin> portcfgshow 10/2 Area Number: 82 Speed Level: AUTO(HW) Fill Word(On Active) 3(A-A then SW I-A) Brocade Fabric OS Command Reference 683 53-1004112-02