Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 133

chassisCfgPerrThreshold chassisCfgPerrThreshold Configures parity error threshold and fault capability on a blade or switch. Synopsis chassiscfgperrthreshold --enable [-threshold threshold_value] chassiscfgperrthreshold --disable chassiscfgperrthreshold --show chassiscfgperrthreshold --help Description Use this command to enable or disable the fault capability on a blade and switch based on the parity error threshold, to set the threshold value for parity errors, or to display the configuration. If the fault capability is enabled, the state of the blade or switch changes to Faulty when the parity errors exceed the threshold value within a time interval of 5 minutes. The default threshold value is 2. You can modify the threshold using the -threshold threshold_value option. The configuration is persistent across system reboots and high availability (HA) failover. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: --enable Enables the fault capability on a blade or switch. The default threshold value is 2. The following operand is optional: -threshold threshold_value Specifies the threshold value for parity errors. The range is from 2 through 100. --disable Disables the fault capability on a blade or switch. --show Displays the configured threshold value and the current status of the fault capability as enabled or disabled. --help Displays the command usage. Examples To enable fault capability: switch:admin> chassiscfgperrthreshold --enable To disable fault capability: switch:admin> chassiscfgperrthreshold --disable To enable fault capability and set the threshold value to 76: switch:admin> chassiscfgperrthreshold --enable -threshold 76 Brocade Fabric OS Command Reference 109 53-1004112-02