Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 792

portDPortTest Remote port index The port number on the remote side of the link Mode The testing mode: Automatic (initiated due to port online event) or Manual (manually restarted using this command). No. of test frames Number of frames sent for link traffic test. Test frame size The test frame size in bytes. Pattern The predefined pattern name. Payload The user-defined payload pattern. FEC (enabled/option/active) The forward error correction (FEC) status. This option is not supported for D_Port HBA. CR (enabled/option/active) The credit recovery (CR) status. This option is not supported for D_Port HBA. Start time Date and time of test start End time Date and time of test completion Status On the link initiator, this field displays the overall test status as PASSED, FAILED, SKIPPED, IN PROGRESS, NOT STARTED, or STOPPED. On the link responder, the status displays PASSED, FAILED, STOPPED, or RESPONDER. Test For each sub-test, the command displays the Start time, test result (PASSED, FAILED, IN PROGRESS, NOT STARTED, STOPPED, or RESPONDER), estimated time in seconds, and diagnostic comments. Comments include the following: No SFP or chip support The test result is skipped because the SFP or port is not capable of D_Port functionality. See remote port results The test result related to this comment is RESPONDER. The port is in responder state and test results will be available at the initiator port on the remote side of the link. Remote port is not ready to start the test The test failed because the remote port is not ready to start the D_Port test. No remote SFP or chip support The test is skipped because the D_Port test is run between a QSFP and SFP port connected through break-out cable or when the remote SFP is not capable of running the optical loopback test. 768 Brocade Fabric OS Command Reference 53-1004112-02