Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1041
slotShow, SW BLADE, UNKNOWN
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1041 highlights
slotShow slotShow Displays the status of all slots in the system. Synopsis slotshow [-m] [-p] Description Use this command to display the current status of each slot in the system. Depending on the option used, the command retrieves information on blade type, blade ID, status, Brocade model name, and power usage for each slot in the switch or chassis. This command does not display the model names for unsupported blades. If a blade is not supported, only the Blade ID is displayed, and the Status field registers as FAULTY(9). Use the list below to identify the model name associated with an unsupported blade. When no operand is specified, slotShow displays the blade type, blade ID, and status for each slot. In this view, the fields and their possible values are as follows: Slot Displays the physical slot number. Blade Type Displays the blade type as one of the following: SW BLADE The blade is a switch. CP BLADE The blade is a control processor. CORE BLADE The blade is a core switch blade. AP BLADE The blade is an application processor. UNKNOWN The blade not present or its type is not recognized. ID Displays the blade type ID as one of the following: 50 CP8 control processor blade 51 FC8-48 switch blade 52 Core8 core blade 55 FC8-32 switch blade 75 FX8-24 application processor blade Brocade Fabric OS Command Reference 1017 53-1004112-02