Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 922

portStatsShow fec_uncor_detected The number of errors left uncorrected by FEC. er_enc_in The number of encoding errors inside frames. er_crc The number of frames with cyclic redundancy check (CRC) errors. er_trunc The number of frames shorter than the minimum frame length. er_toolong The number of frames longer than the maximum frame length. er_bad_eof The number of frames with bad end-of-frame. er_enc_out The number of encoding error outside frames. er_bad_os The number of invalid ordered sets (platform- and port-specific). er_pcs_blk The number of Physical Coding Sublayer (PCS) block errors. This counter records encoding violations on 10 Gbps or 16 Gbps ports. This is applicable only on platforms that support 10 Gbps or 16 Gbps ports. er_rx_c3_timeout The number of receive class 3 frames received at this port and discarded at the transmission port due to timeout (platform-and port-specific). er_tx_c3_timeout The number of transmit class 3 frames discarded at the transmission port due to timeout (platform- and port-specific). er_unroutable The number of frames discarded because they cannot be routed. er_unreachable The number of frames discarded because the destination port cannot be reached. This field is specific to 16 Gbps-capable platforms. er_c3_dest_unreach The number of class 3 frames discarded because the destination cannot be reached. This field is specific to 8 Gbps-capable platforms. er_other_discard The number of other discarded due to route lookup failures or other reasons. er_zone_discard The number of class 3 frames discarded due to zone mismatch. er_type1_miss The number of FCR frames with transmit errors. 898 Brocade Fabric OS Command Reference 53-1004112-02