Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1054
To enable the, To set the severity level for switch events and MAPS alerts interactively
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1054 highlights
snmpConfig To set the SNMPv3 configuration of a switch noninteractively: switch:admin> snmpconfig --set snmpv3 -index 2 -user user1 \ -host 1.3.4.5 -port 178 -severity 5 -auth_proto 2 \ -auth_passwd "password1" -priv_proto 3 -priv_passwd "password2" \ -engine_id "80:00:08:08:08:98:AB:5C:01" -notify_type informs \ Committing configuration.....done To set the severity level for switch events and MAPS alerts interactively: switch:admin> snmpconfig --set mibcapability [...] SW-TRAP (yes, y, no, n): [yes] swFCPortScn (yes, y, no, n): [yes] swEventTrap (yes, y, no, n): [yes] DesiredSeverity: (0..4) [0] 4 swIPv6ChangeTrap (yes, y, no, n): [yes] DesiredSeverity: (0..4) [0] 4 swPmgrEventTrap (yes, y, no, n): [yes] [...] To enable the mapsTrapAM noninteractively: switch:admin> snmpconfig --enable mibcapability \ -mib_name SW-MIB -trap_name mapsTrapAM Operation succeeded To enable the swEventTrap of the SW-MIB category only (this operation disables all other SNMP traps in this MIB category): switch:admin> snmpconfig --set mibcapability \ -mib_name SW-MIB -bitmask 0x10 Operation succeeded switch:admin> snmpconfig --show mibcapability [...] SW-TRAP: NO swFCPortScn: YES swEventTrap: YES DesiredSeverity:4 swIPv6ChangeTrap: YES DesiredSeverity:None swPmgrEventTrap: YES swFabricReconfigTrap: YES swFabricSegmentTrap: YES swExtTrap: NO swStateChangeTrap: NO swPortMoveTrap: NO swBrcdGenericTrap: YES swDeviceStatusTrap: YES swZoneConfigChangeTrap: NO [...] 1030 Brocade Fabric OS Command Reference 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/1054.png)