Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 805
er_other_disc, c3-timeout rx
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 805 highlights
portErrShow disc c3 link fail loss sync loss sig frjt fbsy c3-timeout tx c3-timeout rx pcs err Number of Class 3 frames discarded (Rx). This counter includes the sum of the following class 3 discard counters reported by the portStatsShow command: er_rx_c3_timeout, er_tx_c2_timeout, er_c2_dest_unreach, and er_other_disc. Refer to portStatsShow help for a description of these counters. Number of link failures (LF1 or LF2 states) received (Rx). Number of times synchronization was lost (Rx). Number of times a loss of signal was received (increments whenever an SFP is removed) (Rx). Number of transmitted frames rejected with F_RJT (Tx). Number of transmitted frames busied with F_BSY (Tx). The number of transmit class 3 frames discarded at the transmission port due to timeout (platform- and port-specific). The number of receive class 3 frames received at this port and discarded at the transmission port due to timeout (platform- and port-specific). The number of Physical Coding Sublayer (PCS) block errors. This counter records encoding violations on 10 Gbps or 16 Gbps ports. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. This command is not supported on FCoE ports. Operands This command has the following optional operands: [slot/]port1[-[slot/]port2] Displays port error summary for a single port or for a range of ports, relative to the slot number on bladed systems. Port numbers in a range must be separated by a dash (-), for example, 3-5, or 2/0-2/15. Port ranges cannot span slots. Use switchShow to display a listing of valid ports. Port operands are optional; if omitted, information for all ports is displayed. -i | -index [index1[-index2]] Displays port error summary for a single port or for a range of ports identified by port index numbers. You may specify index ranges separated by "-", for example, -i 33-47. Brocade Fabric OS Command Reference 781 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/805.png)