Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 492
Switch WWN, Port state: Online or Offline.
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 492 highlights
lfCfg Switch WWN The logical switch world wide name. When issued with the -lisl option, the command displays the following information: FID Fabric ID of the logical switch. Port Number of the logical LISL port. remote-domain Domain ID of the base switch in the remote chassis. Name Switch name. State Port state: Online or Offline. Associated physical ports Physical ports associated with the LISL ports. When lfCfg is issued within a logical switch context, only the configuration regarding that switch and the fabrics reachable from that switch is displayed. When the command is issued in a chassis context the information for all chassis in the base fabric reachable from the current chassis is displayed. Executing chassis-level commands requires chassis permissions. Refer to the userConfig command for information on setting chassis user permissions. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. This command is supported only on hardware platforms that are Virtual Fabric-aware and run Fabric OS v6.2.0 or later. Refer to the Fabric OS Administrator's Guide for specific hardware support. You cannot use the portEnable command on logical ports. Use lfcfg with the --lislenable option to re-enable disabled LISL ports on a logical switch. Operands This command has the following operands: --show -cfg Displays information for the fabric ID set by the context in all chassis reachable from the base fabric. --showall -cfg Displays information for all fabrics in all chassis reachable from the chassis context in which the command is executed. This option requires chassis permissions. --show -lisl Displays status information about the LISLs in the logical switch set by the context. --showall -lisl Displays status information of all LISLs in the chassis. This option requires chassis permissions. 468 Brocade Fabric OS Command Reference 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/492.png)