Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 283
fcpProbeShow
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 283 highlights
fcpProbeShow fcpProbeShow Displays the Fibre Channel Protocol (FCP) probe information. Synopsis fcpprobeshow [slot/]port Description Use this command to display the Fibre Channel Protocol daemon (FCPD) device probing information for the devices attached to the specified F_Port or FL_Port. This information includes the number of successful logins and SCSI INQUIRY commands sent over this port and a list of the attached devices. This command includes probing information for NPIV devices. In addition, this command displays the list of devices connected to a port and the number of successful PLOGI, PRLI, INQUIRies, and current probe state. For F_Ports and NPIV ports, when the F_Port Device Update Mode is ON, the probed device details are updated in the "npiv update map" field. When the F_Port Device Update Mode is OFF, the probed device details are updated in the "update map" field. Use the configure command to configure the F_Port Device Update Mode. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: slot For bladed systems only, specify the slot number of the port to display, followed by a slash (/). port Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. This operand is required. Examples To display the FCP probe information: switch:admin> fcpprobeshow 31 port 0 is FV-Port and it is online. nodes probed: 3 successful PLOGIs: 3 successful PRLIs: 3 successful INQUIRies:3 successful LOGOs: 3 outstanding IUs: 0 probing state: 3 probing TOV: 0 probing count: 0 probing next: 0 pmap: 0x00000000, 0x00000000, 0x00000000, 0x00000000 update map: 0x40000000, 0x00000000, 0x00000000, 0x00000000 npiv pmap: 0x00000000 0x00000000 0x00000000 0x00000000 \ 0x00000000 0x00000000 0x00000000 0x00000000 npiv update map: 0x00000006 0x00000000 0x00000000 0x00000000 \ 0x00000000 0x00000000 0x00000000 0x00000000 Brocade Fabric OS Command Reference 259 53-1004112-02