Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1191

zoneObjectExpunge zoneObjectExpunge Expunges a zone object. Synopsis zoneObjectExpunge "objectName" Description Use this command to expunge a zone object. In addition to deleting the object, this command also removes the object from the member lists of all other objects. After successful execution of this command, the specified object no longer exists the database. You can use this command for all zone object types, including cfg, zone, and alias. Target Driven Peer Zones are not allowed to be edited using this command. This command changes the defined configuration. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change to become effective, enable the configuration with the cfgEnable command. Notes When FCS policy is enabled, this command can be issued only from the primary FCS switch. The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operand: "objectName" The name of the object that you want to expunge. Quotation marks are optional. This operand is required. Examples To create a configuration containing three zones: switch:admin> cfgshow Defined configuration: cfg: USA_cfg Red_zone; White_zone; Blue_zone zone: Blue_zone 1,1; array1; 1,2; array2 zone: Red_zone 1,0; loop1 zone: White_zone 1,3; 1,4 alias: array1 21:00:00:20:37:0c:76:8c; \ 21:00:00:20:37:0c:71:02 alias: array2 21:00:00:20:37:0c:76:22; \ 21:00:00:20:37:0c:76:28 alias: loop1 21:00:00:20:37:0c:76:85; \ 21:00:00:20:37:0c:71:df switch:admin> zoneobjectexpunge "White_zone" switch:admin> cfgshow Defined configuration: cfg: USA_cfg Red_zone; Blue_zone zone: Blue_zone 1,1; array1; 1,2; array2 zone: Red_zone 1,0; loop1 Brocade Fabric OS Command Reference 1167 53-1004112-02