Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 576

myId myId Displays the current login session details. Synopsis myid Description Notes Use this command to display the status of the system and the login session details. This includes IPv4 or IPv6 addresses associated with the login session. The login session gives details of the following: • CP/switch (or console/serial port) used to log in. • The IP address of the current login session for Telnet or the name of the current console port or the serial port (if modem login used). • The current CP mode (Active, Standby, or N/A). • The current system status (Redundant, Nonredundant, or N/A). The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands None Examples To display current login information: switch:admin> myid Current Switch: switch Session Detail: switch (123.123.123.123) Active Redundant switch:admin> myid Current Switch: sw0 Session Detail: sw0 (123.123.123.123) N/A HA-Status-N/A SEE ALSO version 552 Brocade Fabric OS Command Reference 53-1004112-02